Unit 18871
Unit will start with any code or without putting in a code. Do we have it set up wrong? Access Control Mode says Use Access Keys after we set the code on it.
Solved
Keypad
Best answer by Loris Hernandez
Hello
I have looked at the machine 18871, the unit configuration seems to be ok and a code is assigned to it.
The issue can come from the wiring.
To work correctly the unit must detect the Input2 (brown wire) connected to an ignition signal.
Could you please check physically the wiring and coming back to me if needed?
BR
Loris
This topic has been closed for comments
Hi
Cheers,
Stine
Hello
I have looked at the machine 18871, the unit configuration seems to be ok and a code is assigned to it.
The issue can come from the wiring.
To work correctly the unit must detect the Input2 (brown wire) connected to an ignition signal.
Could you please check physically the wiring and coming back to me if needed?
BR
Loris
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.